Looking for a reliable supplier or an alternative grade? Tell us what you need

Polyphenylene Ether (PPE) + High Impact Polystyrene (HIPS)

HS2000X - Americas (PPE+PS)-MF17

Manufacturer:Not available in English

Strong electrical performance, dimensional stability, very low moisture absorption, hydrolytic stability

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.25g/cm³
Melt flow rate7.6g/10min
Tensile strength74.0MPa
Tensile modulus3650.0MPa
Elongation at break8.4%
Flexural strength117.0MPa
Flexural modulus3670.0MPa
Notched impact strength9.0kJ/m²
HDT 1.8MPa117.0°C
Vicat softening point132.0°C
Flame ratingUL94 5VA at 2mm, V0 at 1.5m, UL746C Outdoor Suitability rating of F1—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.

Storage
Confirm packaging, temperature and humidity, shelf life, and handling after opening.
Drying
Confirm whether drying is required, plus temperature, time, dew point and target moisture.
Equipment setup
Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
Applications
Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.