Polypropylene (PP)
PP-K30 Maxxam™ MD 4245-59770
Manufacturer：Not recorded
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.12 | g/cm³ |
| Melt flow rate | 15.0 | g/10min |
| Tensile strength | 20.7 | MPa |
| Elongation at break | 40.0 | % |
| Flexural strength | 38.6 | MPa |
| Flexural modulus | 1930.0 | MPa |
| Notched impact strength | 37.0 | kJ/m² |
| HDT 1.8MPa | 106.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- No drying value was confirmed by extraction; review the source.
- Equipment setup
- Candidate injection-molding recommendations: mold temperature 16 - 50 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: automotive, construction. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Mold temperature：page 1
- Application areas：page 1
