Looking for a reliable supplier or an alternative grade? Tell us what you need

PMMA

PLEXIGLAS® Heatresist hw55

Manufacturer:Röhm GmbH

High light transmission, good flowability, high mechanical strength, surface hardness and abrasion resistance, excellent weatherability, increased heat deflection temperature under load, improved resistance to stress cacking, optimised inherent color, AMECA li

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.08g/cm³
Melt flow rate1.2g/10min
Tensile strength80.0MPa
Tensile modulus3600.0MPa
Elongation at break3.5%
HDT 1.8MPa106.0°C
HDT 0.45MPa109.0°C
Vicat softening point119.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.

Storage
Confirm packaging, temperature and humidity, shelf life, and handling after opening.
Drying
Confirm whether drying is required, plus temperature, time, dew point and target moisture.
Equipment setup
Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
Applications
Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.