PC

AC1080

Manufacturer:出光兴产

{'processing_cn': '注塑成型', 'special_characteristics_cn': '阻燃,无卤素,无磷'}

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.22g/cm³
Melt flow rate11.0g/10min
Tensile strength60.0MPa
Elongation at break90.0%
Flexural strength90.0MPa
Flexural modulus2900.0MPa
Notched impact strength20.0kJ/m²
HDT 1.8MPa117.0°C
Flame rating{'burning_behav_1_5_mm': 'V-0 class', 'burning_behav_5v_2_0_mm': '5VA class'}—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 120 °C; time 5 - 8 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 260 - 280 °C; mold temperature 60 - 90 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1