Polycarbonate (PC)

PRL PC-GP2-D-color-1

Manufacturer:聚合物资源有限公司

注塑成型

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.2g/cm³
Melt flow rate12.5g/10min
Tensile strength62.1MPa
Elongation at break140.0%
Flexural strength95.8MPa
Flexural modulus2310.0MPa
Notched impact strength801.0kJ/m²
HDT 1.8MPa135.0°C
HDT 0.45MPa129.0°C
Vicat softening point152.0°C
Flame ratingV-2—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 118 - 124 °C; time 3 - 4 h. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 288 - 316 °C; mold temperature 71.1 - 93.3 °C. Verify the source, grade and conditions.
Applications
Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1