PC
PRL PC-FR1A-D-color-3
Manufacturer:Polymer Resources, Ltd.
阻燃,紫外线稳定或耐候性良好
Recorded properties
Record date:2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.21 | g/cm³ |
| Melt flow rate | 7.5 | g/10min |
| Tensile strength | 62.1 | MPa |
| Elongation at break | 90.0 | % |
| Flexural strength | 89.6 | MPa |
| Flexural modulus | 2206.0 | MPa |
| Notched impact strength | 641.0 | kJ/m² |
| HDT 1.8MPa | 135.0 | °C |
| HDT 0.45MPa | 129.0 | °C |
| Vicat softening point | 149.0 | °C |
| Flame rating | V-2 | — |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- Candidate injection-molding recommendations: temperature 118 - 124 °C; time 3 - 4 h. Verify the source, grade and conditions.
- Equipment setup
- Candidate injection-molding recommendations: melt temperature 316 - 343 °C; mold temperature 82.2 - 116 °C. Verify the source, grade and conditions.
- Applications
- Review the source and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Drying temperature:page 1
- Drying time:page 1
- Melt temperature:page 1
- Mold temperature:page 1