Polycarbonate (PC)

D10001VP

Manufacturer:LNP™ THERMOCOMP™

非溴化、非氯化阻燃,室温及低温下高冲击强度和延展性,良好的户外耐候性能

Recorded properties

Record date:2026-11-07

PropertyValueUnit
Density1.21g/cm³
Tensile strength55.0MPa
Tensile modulus2250.0MPa
Elongation at break95.0%
Flexural strength91.0MPa
Flexural modulus2200.0MPa
Notched impact strength800.0kJ/m²
HDT 1.8MPa132.0°C
HDT 0.45MPa121.0°C
Flame ratingV-0 class—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 90 - 110 °C; time 3 - 4 h; processing moisture ≤0.02 %. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 280 - 320 °C; mold temperature 80 - 120 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: electrical and electronics. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 1
  • Processing moisture:page 1
  • Melt temperature:page 1
  • Mold temperature:page 1
  • Application areas:page 2